{
 "schema_version": 1,
 "id": "yanshan_yu2023",
 "name": "Wearable VIR",
 "full_name": "Yanshan University wearable vascular interventional surgical robot",
 "group": "Yanshan University, Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System (Haoyang Yu, Hongbo Wang, Jianye Niu) with Fudan University Academy for Engineering & Technology",
 "group_short": "Yanshan U.",
 "family": "academic",
 "category": "academic",
 "first_year": 2023,
 "latest_year": 2024,
 "versions": "2023 wearable system (yu2023_wearable; received 2023, IJMRCAS 2024;20(1):e2616); its fuzzy-PID position controller comes from the group's earlier robot Yu et al., Appl. Sci. 2021;11(2):611 (ref. 24, not read); the same group's 2023 complex-coronary robot is A2's yu_complexcoronary_2023; 2021: H. Yu / H. Wang (Yanshan) VIS robot with force feedback and flexible clamping (Yu 2021 Appl. Sci. 11:611) and precise-delivery VIS robot with an operating-sleeve leader (Wang 2021 IEEE Access), possibly one robot (Chen 2023 Figs. 6(d), 9(a); Duan 2023 Table 1 row 4) (chen2023_operating; duan2023_progress); 2018: H. Y. Yu / H. B. Wang (Yanshan) master-slave system: master with an operating sleeve that slides and turns on a shaft (ball and V-groove decoupling), two encoders and a magnetic-particle clutch for force feedback; wire feeder that clamps, pushes and twists the device with a fixed, a promoting and a rotating finger; five servo motors; bench: feedback torque of the clutch calibrated with weights from 0.05 to 1 N m, about linear in the clutch current (Yu 2018 RCAR, Secs. II, IV, Figs. 2, 6, 11); the group's 2011-2015 mechanisms (X. Yang, H. Wang; Zhao 2022 Table 1 row 8b, Belikov 2024 Fig. 6 YA) are earlier versions, not read (yu2018_master; zhao2022_remote; belikov2024_evolution)",
 "target_anatomy": "coronary (PCI): radial artery to the coronary arteries in a human vessel model, femoral access to the right coronary artery in a pig (yu2023_wearable Sec. 2.3.3-2.3.4)",
 "devices": [
  "guidewire",
  "catheter"
 ],
 "devices_driven": "one guidewire or one catheter at a time; catheter and guidewire cannot be driven together (Sec. 4). Animal study: Cordis ATW guidewire (ATW-595-ME014) through a manually placed MPA1 8F catheter (Sec. 2.3.4)",
 "n_dof": 3,
 "n_dof_detail": "3 device DOF: clamp, push/pull, twist (Sec. 2.1, Sec. 5); plus DM pitch set by a linear actuator and position on a lockable slideway of the wearable frame (Sec. 2.1.2, Fig. 6)",
 "translation_mechanism": "clamp-relay",
 "translation_detail": "clamp-relay: fixing module (F1, F2) holds the wire while the clamping module (C1, C2) on a screw-driven slider pushes, then they swap ('reciprocating delivery'; Sec. 2.1.2, Figs. 7-8); propulsion DC motor 26SYK55.24 (Sec. 2.2.1)",
 "rotation_mechanism": "rotating-clamp",
 "rotation_detail": "wedge-shaped gripper closed by a crank-rocker and spring, rotated with the clamped wire through a gear set by a Maxon RE13 motor (Sec. 2.1.2, Fig. 9)",
 "device_range": "N.R.",
 "footprint_mm": "N.R.",
 "mass_kg": "N.R.",
 "force_sensing": "slave: pressure sensor (SBT674-10 N) under the clamping module, a lever with arm ratio l1/l2 = 3 amplifies the delivery resistance 3x (Sec. 2.1.2, Fig. 10); master: torque sensor (DSN-206) in the handle drive (Sec. 2.2.1)",
 "haptics_leader": "custom 3-DOF handle (operating manipulator): slide and rotation read by encoders, three-button squeeze read by a thin-film sensor (Flexiforce) sets the clamp; a servo motor with torque sensor drags the handle, velocity-force mapping slows it as delivery resistance rises (Sec. 2.1.1, 2.2.2, Figs. 2-5, 14)",
 "imaging_compat": "used under a C-arm angiography system in the pig study (Sec. 2.3.4, Fig. 19); radiolucency N.R.",
 "sterility": "driven gear shaft and gripper held by a magnetic cover, removed and replaced after surgery for sterilisation (Sec. 2.1.2); drape N.R.",
 "highest_validation": "animal",
 "validation_detail": "bench: 5 push and 5 twist master-slave tracking runs, 5 force-feedback runs (Sec. 2.3.1-2.3.2); human vessel model: 4 untrained testers x 3 targets x 3 trials, all 12 target deliveries within 60 s by the 3rd trial (Table 1); animal: 1 Bama pig (SIAT), guidewire to the right coronary artery, 3 robotic vs 3 manual deliveries, delivery time +2.46 %, operator exposure time -71.50 % (Sec. 2.3.4, 3.4, Fig. 23)",
 "key_numbers": "static error 0.048 mm (0.019 %), relative dynamic error 0.204 % over 250 mm; rotation static error 1.259 deg (0.682 %), relative dynamic 2.217 % over 400 deg; force-feedback error mean 0.021 N, max 0.055 N (mean 2.566 %, max 6.746 %) (Sec. 3.1-3.2); 5 motors in master + slave; wireless NRF24L01 master-slave link (Sec. 2.2.1)",
 "sim_model": "none found",
 "has_sim_model": false,
 "sim2real": "none-found",
 "sim2real_detail": "none found",
 "picture": {
  "status": "not-cleared",
  "grade": "C",
  "kind": "photo",
  "source": "yu2023_wearable Fig. 15, slave-end panel (delivery manipulator on its propulsion test bench), p. 6, IJMRCAS 2024 doi:10.1002/rcs.2616",
  "source_url": "https://doi.org/10.1002/rcs.2616",
  "licence": "publisher copyright",
  "credit": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 15. publisher copyright.",
  "edits": "native extract (942 x 455 figure); cropped to the slave-end panel; nothing erased; not upscaled",
  "file": null
 },
 "pictures": [
  {
   "id": "yanshan_yu2023_01",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "in-use",
   "caption": "Delivery manipulator worn on the pig's hind leg; operator console in the isolation room",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 19, p. 8",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 19, p. 8",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_02",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "render",
   "caption": "Slave mechanism: delivery manipulator, wearable component, linear actuator and slideway",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 6, p. 3",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 6, p. 3",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_03",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "render",
   "caption": "Delivery manipulator: Y-valve holder, fixing and clamping modules, screw and propulsion motor",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 7, p. 4",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 7, p. 4",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_04",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "close-up",
   "caption": "Clamping module: wedge gripper, crank-rocker, gear set and magnetic cap",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 9, p. 4",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 9, p. 4",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_05",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "leader",
   "caption": "Operating manipulator: handle on a slide inside the console shell",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 2, p. 3",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 2, p. 3",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_06",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "leader",
   "caption": "Inside the operating manipulator: belt, encoders, servo motor and torque sensor",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 3, p. 3",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 3, p. 3",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_07",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "setup",
   "caption": "Twist-tracking bench: master and slave rotating encoders",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 16, p. 6",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 16, p. 6",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_08",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "setup",
   "caption": "Force-feedback bench: guidewire from the Y-valve onto a spring-loaded sensor",
   "source_key": "yu2023_wearable",
   "source": "Yu et al., The International Journal of Medical Robotics and Computer Assisted Surgery (2023), Fig. 17, p. 7",
   "source_url": "https://doi.org/10.1002/rcs.2616",
   "where": "Fig. 17, p. 7",
   "licence": "publisher copyright"
  },
  {
   "id": "yanshan_yu2023_09",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "photo",
   "caption": "2018 wire feeder with rotating, promoting and fixed fingers",
   "source_key": "yu2018_master",
   "source": "Yu et al., 2018 IEEE International Conference on Real-time Computing and Robotics (RCAR) (2018), Fig. 6, p. 470",
   "source_url": "https://doi.org/10.1109/rcar.2018.8621763",
   "where": "Fig. 6, p. 470",
   "licence": "publisher copyright (IEEE)"
  },
  {
   "id": "yanshan_yu2023_10",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "leader",
   "caption": "2018 master manipulator: operating sleeve on a shaft with clutch and belt",
   "source_key": "yu2018_master",
   "source": "Yu et al., 2018 IEEE International Conference on Real-time Computing and Robotics (RCAR) (2018), Fig. 2, p. 470",
   "source_url": "https://doi.org/10.1109/rcar.2018.8621763",
   "where": "Fig. 2, p. 470",
   "licence": "publisher copyright (IEEE)"
  }
 ],
 "sources": [
  {
   "key": "yu2023_wearable",
   "doi": "10.1002/rcs.2616",
   "url": null,
   "title": "Design and evaluation of a wearable vascular interventional surgical robot system",
   "year": 2023,
   "venue": "The International Journal of Medical Robotics and Computer Assisted Surgery"
  },
  {
   "key": "chen2023_operating",
   "doi": "10.1109/tmrb.2023.3272049",
   "url": null,
   "title": "The Catheter and Guidewire Operating Systems of Vascular Interventional Surgical Robots: A Systematic Review",
   "year": 2023,
   "venue": "IEEE Transactions on Medical Robotics and Bionics"
  },
  {
   "key": "duan2023_progress",
   "doi": "10.3390/mi14010197",
   "url": null,
   "title": "Technical and Clinical Progress on Robot-Assisted Endovascular Interventions: A Review",
   "year": 2023,
   "venue": "Micromachines"
  },
  {
   "key": "yu2018_master",
   "doi": "10.1109/rcar.2018.8621763",
   "url": null,
   "title": "Master-Slave System Research of a Vascular Interventional Surgical Robot",
   "year": 2018,
   "venue": "2018 IEEE International Conference on Real-time Computing and Robotics (RCAR)"
  },
  {
   "key": "zhao2022_remote",
   "doi": "10.21037/qims-21-792",
   "url": null,
   "title": "Remote vascular interventional surgery robotics: a literature review",
   "year": 2022,
   "venue": "Quantitative Imaging in Medicine and Surgery"
  },
  {
   "key": "belikov2024_evolution",
   "doi": "10.1016/j.jestch.2024.101789",
   "url": null,
   "title": "Evolution and current state of robotic catheters for endovascular surgery: A comprehensive review",
   "year": 2024,
   "venue": "Engineering Science and Technology, an International Journal"
  }
 ],
 "read_level": "full",
 "read_level_detail": "full (yu2023_wearable,, hand-downloaded 2026-11-08); full (yu2018_master, version line)",
 "notes": "Resolves A2's open question: yu_complexcoronary_2023 (Yu, Wang, ..., Niu) is the Yanshan University group. | 2026-10-13 coordinator: highest_validation bench -> phantom from the full text (W4_notes.md) | 2026-10-13 Q2: highest_validation restored phantom -> animal (abstract: \"human vascular models and animal experiments\"); the coordinator bench -> phantom correction of 18:00 was meant for yu_complexcoronary_2023 (W6_notes.md item 9) | 2026-11-08 X3: full text read; slave is a wearable frame strapped to the patient's limb (pig hind leg), no bedside arm (Sec. 2.1.2, 2.3.4); one pig confirmed (validation stays animal); devices at once = 1 (Sec. 4) | N4 2026-11-09: yu2018_master read in full: built master and wire feeder (photos, Figs. 2 and 6), one measured bench result (clutch torque calibration, Sec. IV-B); the position-tracking result named in the abstract is not reported in the text; filed as a version line (same group and three-finger feeder lineage); row cells unchanged",
 "maintainers_own": false,
 "found_by": "gap"
}
