{
 "schema_version": 1,
 "id": "sia_zhang2025",
 "name": "SIA finger-twist robot",
 "full_name": "SIA master-slave vascular interventional robot with bionic finger-twisting guidewire mechanism",
 "group": "Shenyang Institute of Automation, CAS, State Key Laboratory of Robotics (Hao Liu, Tianyu Zhang, Peng Lin, Liming Zheng, Xiao He) with General Hospital of Northern Theater Command (Ximei Zhao, Jing Qiu); 2022 leader device with Shenyang Jianzhu University",
 "group_short": "SIA (CAS)",
 "family": "academic",
 "category": "academic",
 "first_year": 2022,
 "latest_year": 2025,
 "versions": "2022 master manipulator with force feedback (li2022_design, title/affiliations); 2025 slave with bionic finger twisting mechanism + force-based occlusion detection (zhang2025_obstruction, full); 2024: SIA (Hao Liu, Peng Lin) flexible-belt constrained catheterization robot: guidewire in a lumen of two magnet-joined belts pulled by friction rollers, rear-end clamp twists, bench delivery error <= 1.5 mm at 75-125 mm belt spacing (Tian 2024 ICMA; Alekseeva 2025 Table 10 row 4, Fig. 11e) (tian2024_flexbelt; alekseeva2025_design); 2017: SIA (A. Gao, H. Liu) with the General Hospital of Shenyang Command, contact-aided asymmetric tendon-driven ablation catheter (2.6 mm): tendons pulled by a motorised lead screw for the bench bending tests, left-atrium phantom reached by manual tendon, rotation and insertion (Gao 2017 RA-L) (Alekseeva 2025 Table 14 row 7) (gao2017_contactaided; alekseeva2025_design)",
 "target_anatomy": "N.R. (vascular model with 4 branch regions)",
 "devices": [
  "guidewire",
  "catheter",
  "therapeutic-device"
 ],
 "devices_driven": "guidewire (twisted and advanced) and catheter (clamped by a solenoid valve) (zhang2025_obstruction Sec. IV-A)",
 "n_dof": 2,
 "n_dof_detail": "2 (axial delivery + rotation; displacement and rotation-angle mapping, zhang2025_obstruction Sec. III)",
 "translation_mechanism": "linear-stage+clamp",
 "translation_detail": "linear-stage+clamp",
 "rotation_mechanism": "roller-rolling",
 "rotation_detail": "other: bionic finger twisting mechanism",
 "device_range": "N.R.",
 "footprint_mm": "N.R.",
 "mass_kg": "N.R.",
 "force_sensing": "proximal: two force sensors on the twisting mechanism for axial force and radial torque (zhang2025_obstruction Sec. II-A)",
 "haptics_leader": "master handle with two motors and high-precision encoders rendering axial force and radial torque (zhang2025_obstruction Sec. II-A)",
 "imaging_compat": "N.R.",
 "sterility": "N.R.",
 "highest_validation": "phantom",
 "validation_detail": "40 interventions in a vascular model; occlusion detected in 36 (zhang2025_obstruction Sec. IV-B)",
 "key_numbers": "occlusion detection 90% (36/40); axial force RMSE 414.15 mN; radial torque error 1.01 N·m as printed (torque traces are in mN·m); sampling 1 kHz (zhang2025_obstruction Abstract, Sec. IV-A)",
 "sim_model": "none found",
 "has_sim_model": false,
 "sim2real": "none-found",
 "sim2real_detail": "none found",
 "picture": {
  "status": "not-cleared",
  "grade": "C",
  "kind": "photo",
  "source": "zhang2025_obstruction Fig. 5 experimental platform (native raster p. 5)",
  "source_url": "https://doi.org/10.1109/rcar65431.2025.11139717",
  "licence": "publisher copyright",
  "credit": "Zhang et al., 2025 IEEE International Conference on Real-time Computing and Robotics (RCAR) (2025), Fig. 5. publisher copyright.",
  "edits": "native extract; cropped above red text labels; not upscaled",
  "file": null
 },
 "pictures": [
  {
   "id": "sia_zhang2025_01",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "setup",
   "caption": "Master-slave test platform: slave actuator, PC and Geomagic Touch handle",
   "source_key": "li2022_design",
   "source": "Li et al., 2022 IEEE International Conference on Robotics and Biomimetics (ROBIO) (2022), Figure 6(a), p. 4",
   "source_url": "https://doi.org/10.1109/robio55434.2022.10011933",
   "where": "Figure 6(a), p. 4",
   "licence": "publisher copyright"
  },
  {
   "id": "sia_zhang2025_02",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "leader",
   "caption": "Self-designed master manipulator: operation handle, timing belt, force sensor",
   "source_key": "li2022_design",
   "source": "Li et al., 2022 IEEE International Conference on Robotics and Biomimetics (ROBIO) (2022), Figure 6(b), p. 4",
   "source_url": "https://doi.org/10.1109/robio55434.2022.10011933",
   "where": "Figure 6(b), p. 4",
   "licence": "publisher copyright"
  },
  {
   "id": "sia_zhang2025_03",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "setup",
   "caption": "Master manipulator on the force-feedback accuracy test bench",
   "source_key": "li2022_design",
   "source": "Li et al., 2022 IEEE International Conference on Robotics and Biomimetics (ROBIO) (2022), Figure 8, p. 5",
   "source_url": "https://doi.org/10.1109/robio55434.2022.10011933",
   "where": "Figure 8, p. 5",
   "licence": "publisher copyright"
  },
  {
   "id": "sia_zhang2025_04",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "render",
   "caption": "CAD of the master manipulator: spline shaft, handle, slip ring, motor",
   "source_key": "li2022_design",
   "source": "Li et al., 2022 IEEE International Conference on Robotics and Biomimetics (ROBIO) (2022), Figure 2(a), p. 2",
   "source_url": "https://doi.org/10.1109/robio55434.2022.10011933",
   "where": "Figure 2(a), p. 2",
   "licence": "publisher copyright"
  },
  {
   "id": "sia_zhang2025_05",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "render",
   "caption": "Radial torque feedback mechanism of the master manipulator",
   "source_key": "li2022_design",
   "source": "Li et al., 2022 IEEE International Conference on Robotics and Biomimetics (ROBIO) (2022), Figure 5(b), p. 4",
   "source_url": "https://doi.org/10.1109/robio55434.2022.10011933",
   "where": "Figure 5(b), p. 4",
   "licence": "publisher copyright"
  },
  {
   "id": "sia_zhang2025_06",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "photo",
   "caption": "Tian 2024 flexible-belt robot",
   "source_key": "tian2024_flexbelt",
   "source": "Tian et al., 2024 IEEE International Conference on Mechatronics and Automation (ICMA) (2024), tian2024_flexbelt Fig. 8 physical model of the catheterization robot, p. 5",
   "source_url": "https://doi.org/10.1109/ICMA61710.2024.10633087",
   "where": "tian2024_flexbelt Fig. 8 physical model of the catheterization robot, p. 5",
   "licence": "publisher copyright (IEEE)"
  },
  {
   "id": "sia_zhang2025_07",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "setup",
   "caption": "Tian 2024 flexible-belt robot: Experimental scene: robot, monitor and control electronics on an optical table",
   "source_key": "tian2024_flexbelt",
   "source": "Tian et al., 2024 IEEE International Conference on Mechatronics and Automation (ICMA) (2024), Fig. 10, p. 5",
   "source_url": "https://doi.org/10.1109/ICMA61710.2024.10633087",
   "where": "Fig. 10, p. 5",
   "licence": "publisher copyright (IEEE)"
  },
  {
   "id": "sia_zhang2025_08",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "render",
   "caption": "Tian 2024 flexible-belt robot: CAD overview of the delivery and twisting mechanisms (labelled)",
   "source_key": "tian2024_flexbelt",
   "source": "Tian et al., 2024 IEEE International Conference on Mechatronics and Automation (ICMA) (2024), Fig. 2, p. 2",
   "source_url": "https://doi.org/10.1109/ICMA61710.2024.10633087",
   "where": "Fig. 2, p. 2",
   "licence": "publisher copyright (IEEE)"
  },
  {
   "id": "sia_zhang2025_09",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "render",
   "caption": "Tian 2024 flexible-belt robot: Top-view CAD of belts, support block, roller set and clamps (labelled)",
   "source_key": "tian2024_flexbelt",
   "source": "Tian et al., 2024 IEEE International Conference on Mechatronics and Automation (ICMA) (2024), Fig. 3(b), p. 3",
   "source_url": "https://doi.org/10.1109/ICMA61710.2024.10633087",
   "where": "Fig. 3(b), p. 3",
   "licence": "publisher copyright (IEEE)"
  },
  {
   "id": "sia_zhang2025_10",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "close-up",
   "caption": "Tian 2024 flexible-belt robot: CAD of the twisting mechanism with drive gear and rear-end clamp",
   "source_key": "tian2024_flexbelt",
   "source": "Tian et al., 2024 IEEE International Conference on Mechatronics and Automation (ICMA) (2024), Fig. 7, p. 4",
   "source_url": "https://doi.org/10.1109/ICMA61710.2024.10633087",
   "where": "Fig. 7, p. 4",
   "licence": "publisher copyright (IEEE)"
  },
  {
   "id": "sia_zhang2025_11",
   "status": "not-cleared",
   "file": null,
   "thumb": null,
   "kind": "close-up",
   "caption": "Tian 2024 flexible-belt robot: Two flexible belts joined by magnets to form the device lumen",
   "source_key": "tian2024_flexbelt",
   "source": "Tian et al., 2024 IEEE International Conference on Mechatronics and Automation (ICMA) (2024), Fig. 1, p. 2",
   "source_url": "https://doi.org/10.1109/ICMA61710.2024.10633087",
   "where": "Fig. 1, p. 2",
   "licence": "publisher copyright (IEEE)"
  }
 ],
 "sources": [
  {
   "key": "zhang2025_obstruction",
   "doi": "10.1109/rcar65431.2025.11139717",
   "url": null,
   "title": "Obstruction Detection for Robotic Assisted Vascular Intervention",
   "year": 2025,
   "venue": "2025 IEEE International Conference on Real-time Computing and Robotics (RCAR)"
  },
  {
   "key": "li2022_design",
   "doi": "10.1109/robio55434.2022.10011933",
   "url": null,
   "title": "Design and experimental verification of a novel master manipulator with force feedback for vascular interventional robot",
   "year": 2022,
   "venue": "2022 IEEE International Conference on Robotics and Biomimetics (ROBIO)"
  },
  {
   "key": "tian2024_flexbelt",
   "doi": "10.1109/ICMA61710.2024.10633087",
   "url": null,
   "title": "Flexible Belt Constrained Catheterization Robot",
   "year": 2024,
   "venue": "2024 IEEE International Conference on Mechatronics and Automation (ICMA)"
  },
  {
   "key": "alekseeva2025_design",
   "doi": "10.1002/rob.22480",
   "url": null,
   "title": "The Design of Endovascular Robots for Cardiac Interventions: A Survey",
   "year": 2024,
   "venue": "Journal of Field Robotics"
  },
  {
   "key": "gao2017_contactaided",
   "doi": "10.1109/lra.2017.2676351",
   "url": null,
   "title": "A Contact-Aided Asymmetric Steerable Catheter for Atrial Fibrillation Ablation",
   "year": 2017,
   "venue": "IEEE Robotics and Automation Letters"
  }
 ],
 "read_level": "full",
 "read_level_detail": "full (zhang2025_obstruction); title/affiliations (li2022_design)",
 "notes": "Bench photo of a lab prototype; no product-like housing.",
 "maintainers_own": false,
 "found_by": "gap"
}
